Demo the Xyron Machines "My Craft Room Clock"

Tools used to make my craft room clock

Paper 12 x 12 any pattern of choice
Plaid Canary Yellow Acrylic Paint
White Bazzil 12 x 12  to print your yellow center and numbers for clock using the Imagine Machine and Mr.Frosty Pattern Cartridge or Paper of your choice
10 x 10 inch wooden plaque for clock
3/8 inch drill bit for center hole
clock kit

Plaid Canary Yellow Paint
Glue dots mini
3 D Butterfly punch
Imagine machine and Mr. Frosty Pattern cartridge to color in butterflies, center of clock face all in "yellow"
Martha Stewart Elegant Cake Cartridge for the Numbers on Clock...colored yellow with Imagine Mr. Frosty Pattern cartridge
Swiss Dots Emboss folder
Big Shot Machine
9 inch Xyron Creative Station

Xyron 510 machine Loading all Xyron Stations  are the same

The Adhesive Cartridge will only go in one way...Please make sure that you place the tail of the cartridge under the black roller inside the machine

Xyron 250 machine used to add adhesive to the Letters. All stations work the same

Xyron 1.50 tool looks like an X....this tool is really great for ribbon, buttons,etc all the small embellishments. The 1.50" is called Sticker Maker...all you do is drop your small buttons,etc into the top and pull out the bottom...presto..you have adhesive back buttons....these are all a must have tool in your craft room

Clock base..any wooden plaque of choice and size will do. I am using a 10 x 10 square

Start by drilling 3/8 inch hole in the center of Wooden Plaque. Paint Front With Plaid Canary Yellow Acrylic Paint

 Flip clock over and on the back center trace clock kit. Mill out the back  center so the clock kit will fit flush with the base...(this step was not needed...but something I wanted to do)

Insert Clock Kit to make sure it fits..Remove to add your paper to the front of the clock face.

Cut your pattern Paper to  9 x 9 inches

Using the 9" Xyron Creative Station, run your base paper into the Xyron to add edge to edge adhesive to the back. Apply to front of Clock.

Using Imagine Machine. Insert Mini Monogram Cartridge and Mr. Frosty Pattern Cartridge. Select the Monograms for center of clock...color fill the Floral shape Monogram with Mr. Frosty Pattern Cartridge....yellow was selected for my project. Hit print and cut at 5"

 Emboss with Swiss Dots folder..Run through the 9" Xyron for edge to edge adhesive.  Attach to face of clock

Next select a circle from Mini Monogram Cartridge...color fill the circle with Mr. Frosty Pattern Imagine Cartridge...Yellow....print and cut at 3"  Emboss with Cuttlebug Swiss Dot folder.  Run the 3" circle centerr through the Xyron 510 machine for edge to edge adhesive. Add to the face of clock.

  Add the Clock movements according to the instructions that came with the Clock kit. I added a clear rhinestone to my second hand for added bling with the Xyron 1.5 sticker maker

Remove the Mini Monogram Cartridge and replace with Martha Stewart Cricut Cake Elegant Cake Cartridge.  Choose Numbers 1, 2, 3, 6, and 9. Size to 1.8" Using Shift Key and Non Shift Key so you will have the Number and its Shadow ...color fill with the Imagine Mr. Frosty Pattern Cartridge...Yellow. . Print and Cut   Emboss the Numbers with Swiss Dots Folder..

Run the Numbers through Xyron 250 for edge to edge adhesive

.attach to the front of the clock

Punch out my 3 D Butterflies. Run through the Xyron 250, Spinkle with Martha Stewart Clear Glitter.

 layer and attach with Glue Dots Mini's. I attached in outer corners of clock face

 My  Clock is Complete...and it was made so easy with all my wonderful Xyron Products.  Xyron makes adding edge to edge adhesive to all your embellishments large or small, so EASY...

You can not see all the 3 d effect because it is midnight and the light is not that good.
Let's Support the Craft Companies that we use to make our projects

 HEAD OVER TO BY CLICKING ON THE LINK IN THIS SENTENCE     "  XYRON FB PAGE  and LIKE THEIR FAN PAGE"
TELL THEM YOU HEARD ABOUT XYRON FROM CHRIS @ TURNEDGYPSY BLOG